Set of 6 used trolling gurdies for sale
located in Duncan, British Columbia
can deliver them in Seattle or ship to Alaska
They are in good working order
They were manufactured by
Easthope Bros Limited of
Steveston British Columbia
are 8 and ½ inches in diameter
Price: USD $4000
Incudes the cost of delivery
Contact Carl Mundt
NOTE: I can deliver in Seattle the price goes down to $3500
and if I can deliver in Duncan the price is $3000.
SODIUM CRAB LIGHTS WANTED
Looking for 1000w high pressure sodium crab lights
IMS HATCH MOUNT FREEZER SYSTEM
CASH ON HAND
Trolling davits. 9ft long 3ft tall
Hand crank with brake.
Heavy duty aluminum with stainless steel cable.
2 1/2 OD receiving foot.
Price: $550 each
Call: Kurtis 382-0746
3-Spool Trolling Gurdy's
Kolstrand 3-Spool Gurdy $2250
Price listed is for the SET of Gurdys!
One Port and One Starboard!
Call or Text Keith at 907-723-3460
Seine Web For Sale
Brand New Dyneema/Plateena Seine Web
Thought I was going to build a new seine this season, but didn't.
Have 100 fathom X 100md and 100fathom X 50md.
Good price and never used.
Tender Equipment for sale:
650 gallon aluminum tender tank
2 tender scales
Price: $5,000 for pair
or $3000 each
new 2018 with hose
Call, text or email
Derek (907) 830-8528
Seine Boom 23' 6" for sale
Located in Homer
Two winch mounts
5 1/4" Gillnet Wanted
60 Mesh, 200 Fathom Long
For Southeast Alaska Drift Fishery
VOLVO TAMD ENGINE FOR SALE
Selling Volvo TAMD120B
about 18,000 hours
runs great, changed oil every 300 or so hours
have oil change list since engine was new.
doesn't burn oil
approx, 1/2 gal low after 300 hour
it has a few small leaks.
Just pulled it out of my boat.
Price: $8,500 OBO
I also have extra starter, alternator and belts for sale.
Dungy Gear For Sale
42" Trilogy Ocean Pots
with line, buoys, bait bags, and clam jars.
Email @ email@example.com
PERFECT BIG SEINE FOR THE SMALLER BOAT
Bullet proof KevlarPWS seine. E
xcellent condition. Fished four seasons.
3 1/4 strip, Dyneema bunt and prebunt, dyneema center panel
and dyneema lead.
Seine weighs approx 3,500lbs and stacks small.
Because of the fine thread dyneema it tows super easy.
Price: $32,000 firm.
Andrew Smallwood 907 253 5832
Looking for a heavy duty purse line davit
call Rich @808-634-0771
or e-mail firstname.lastname@example.org
Insulated Foam Panel Cold Storage House
30’ x 17’ x 10’ for sale
Looking for a 4 Blade stainless propeller.
24 x 24. Left Hand turn.
To fit 1.5 inch shaft.
Call or text
Bryan at 907-398-7834
Please email: email@example.com
PWS Seine Jack & Joe built
Conventional 3.25 strip with attached lead
and Wedge. brand new 165 fathom purse line 1 1/8"
call Butch 760-238-3593
Like new, used very little
Salmon Tender Gear
40hp Hydraulic 3510 Transvac newly automatic 10" pump
Newly Automated last year.
Everything is new.
We used this new system once in the 2016 Pws seine season.
New flappers, new O rings, new automation system,
rams and valves with upgraded SS pins.
Brand new remote still in bag.
3" manifold on Travaini 700 blower.
Rebuilt 3yrs ago.
New Hydraulic 40GPM motor.
2hrs on it.
Spare 60GPM Hydraulic with 16hrs on it.
I have a 3 phase 40 HP Electric Motor.
Free with Pump.
Located inside storage at Fishermans terminal in Seattle.
Can deliver to Alaska May 1st.
Asking 38k obo for pump
Hoses, dewaterbox, small sorting shoot available for 6K.
New 20' long 10" hose with male and female ends.
One 10' hose with transvac end
10" fittings available are one 90 and one 45.
SS 10” Clamps to put it all together.
(602) 451- 0889
WANTED: Marine Door
Need marine door for new tophouse build.
Used or new.
Email Alex at: firstname.lastname@example.org
Large canister, 3,000 lb. cycles
3" liquid ring pump
60 hp electric motor
full automation, w/ remote control
completely re-conditioned with all new components including motor in 2013
only used two summers, less than 100 days of use
comes with de-watering box and weigh box
85 tons per hour.
Medium canister, 1800 lb. cycles
2" liquid ring pump
40 hp electric motor
50 tons per hour
Call Marco @ (425)399-1662
Jig Machines For Sale
Selling 4 of my jig machines.
DNG 5000i automated jiggers.
Located in Cordova AK.
Have operators manual and the power cords are attached.
$2000 ea or $7500 for all four
Pullmaster and Rotzlers
For Limit Seiner or Tender
19 " Huff hauler with stainless hook stripper.
30 " Nordic longline roller with removable center pin for blackcod.
email for more info at
Cod / Crab pot launcher for sale
-- Heavy Duty aluminum box tube construction (6") with Stainless flat bar on top
-- Custom built frame; Hydraulics completed by Puget Sound Hydraulics, Seattle
-- hydraulic dog cylinders and single action lifting cylinder - finest quality
-- 112" wide by 66" - Big enough for 7'x7' pots; primarily used 6.5 x's
-- used only (2) state water Cod Seasons - In excellent shape.
-- Great for 58' Limit rig - lighter weight than big steel launchers
-- Photos available on request
$12,000 OBO Located in Homer, AK
Selling several pieces of deck equipment
from a small seiner:
Side Roller/Purse Line Davit...stainless rollers/aluminum bases for each side....$500.00 Deck Winch...Kolstrand SW1N...great condition with good hydro motor....$900.00 Power block...19" Marco Puretic...good hydro motor...needs new rubber....$200.00 Boom...18' with 3' gooseneck...5" schedule 80...two strongbacks/one winch pad....$300.00 Pacer Pump...hydraulically driven...2"...includes motor....$100.00
Open to offers and/or trades on all or part of these items.
Looking for a gillnet stern roller; longline side roller;
and a 10' 4-tube Walters keel cooler.
10 skates New snap on long line gear for sale
11/32 x 1800' Everproe S with S.S.clinks in 35 gall. nylon Brute tubs
15/0 hooks (2,500) 11/32 S.S.Swivel snaps on 16" tied gangions
4,3/8x 600'Polypro riser line